If you have ever tried to put up store-bought styrofoam gravestones in your yard for Halloween, you know that the little plastic stakes they come with just don’t cut it. The first little bit of wind and they all blow over. I finally found out how to keep styrofoam tombstones in the ground with a hack using wire shelving and some mesh ribbon. And it really works!
How to Stake Halloween Tombstones
This post may contain affiliate links. We make a small commission if you buy the products from these links (at no extra cost to you). As an Amazon Associate, I earn from qualifying purchases. But we only recommend products we would use ourselves. For more information, click here to see our disclosures.
Every year for Halloween I put up a graveyard in my front yard.
Over the years I have collected quite a few styrofoam gravestones that I have a bit of a love-hate relationship with.
I love them because they are inexpensive, pretty realistic-looking given how cheap they are, and easy to move around.
The one thing that is really annoying about them is that they don’t stay standing. They usually come with these 2″ plastic stakes that are just not long enough or sturdy enough to withstand even a little bit of wind.
Since my graveyard is usually up for the whole month of October, I need something that will stand up through all kinds of weather.
A couple of years ago, I got a suggestion from a reader for using mesh ribbon around the gravestones to hold them onto posts.
She said that you couldn’t really see the mesh ribbon against the tombstones and it’s wide enough to hold them in place. Which was an idea I had to try…and then I had an ah-ha moment!
But first a little back story.
As some of you may know, I live in a builder-grade house.
That means all of my closets came with those white wire closet organizers and shelves.
I really hate those shelves. So I replaced them all with proper shelving.
Which left a whole pile of leftover wire shelves in the garage.
I am always looking for ways to use them up…which leads me back to my ah-ha moment.
I could place those wire shelves behind the tombstones. The wide shelves would help to reinforce the styrofoam.
Then hammer the ends of the shelves into the ground like stakes to make them stand up straight, and use the mesh ribbon to secure the tombstones to the wires.
And guess what? It works!
Keep reading to get all the details on how to keep styrofoam tombstones in the ground.
How To Secure Halloween Tombstones
Step 1 | Figure Out The Support Height
The first step is to figure out how tall your wire shelf tombstone supports need to be.
You want them to come at least a third of the way up the back of the tombstone to provide the best reinforcement.
Then you need an extra 3 or 4 inches that will be hammered into the ground.
So if you have a 24 inch tall gravestone, your shelf support will need to be at least 12 inches high.
Step 2 | Cut The Wire Shelving
The next step is to use a jig saw with a metal blade to cut the wire shelving. You could also use a hack saw, but I’m lazy so I go for the power tools 🙂
First cut the shelf to the height that you figured out about.
Then you’ll need to remove a few of the inner shelf wires.
This will leave some longer side wires that will be hammered into the ground like stakes.
If you have strong hands, you can use wire snips for this part.
Step 3 | Paint The Shelving
Spray paint the wire shelves black or gray so that they aren’t so visible in your yard. (The white will stick out like a sore thumb!)
Step 4 | Hammer the Shelf Support Into The Ground
Figure out where you want your tombstones to go.
Then hammer the shelves into the ground in those locations with the long side wires facing down.
Step 5 | Attach the Mesh Ribbon
Cut a piece of the mesh ribbon that is long enough to wrap all the way around the tombstone.
Tie the mesh ribbon onto one of the shelf support wires.
Then wrap it around the front of the tombstone making sure to spread the mesh out so that it covers as wide an area as possible.
Tie the other end of the mesh ribbon to the wire shelving, making sure to pull it tight enough that the gravestone isn’t moving (but not so tight that the styrofoam gets cut).
Cut off any excess ribbon.
And my reader was right, you really can’t see the mesh.
That’s it! Your Halloween tombstone is now secure!
The tombstone is even stable enough to put stuff on…like my little skeleton. (I used picture wire to attach him to the back of the tombstone so that he would stay standing).
Other Halloween Ideas You Might Like
- Halloween Fog Machine Ideas: How To Make Low Lying Fog
- How to Create a Spooky Halloween Graveyard
- Halloween Outdoor Lighting Ideas: 18 Spooky Ways To Light Your Yard