These gothic lace DIY Halloween mason jar candle holders are pretty enough for an elegant Halloween dinner table, and spooky enough for an over-the-top Halloween party. The perfect Halloween accessory!
I love making Halloween DIY projects for my annual Halloween party. Usually I’m looking for ideas that are a little glam as well as spooky like these Halloween decanter labels and this silver leaf skull. So these gothic lace DIY Halloween mason jar candle holders will fit right in!
Gothic Lace DIY Halloween Mason Jar Candle Holders
This post may contain affiliate links. We make a small commission if you buy the products from these links (at no extra cost to you). As an Amazon Associate, I earn from qualifying purchases. But we only recommend products we would use ourselves. For more information, click here to see our disclosures.
I can’t believe it’s October already. If you know me, you know that means all out Halloween decorating has begun at my house.
Unfortunately, I managed to break my toe on the weekend, so I have had to postpone the major decorating efforts for a little while. But that does mean I have more time to make some simple Halloween decorations, like these gothic lace DIY Halloween mason jar candle holders.
They’re fast and easy to make, and I think they’ll look awesome on my Halloween tablescape.
- Small mason jars, or any other glass jars you have hanging around.
- Repositionable adhesive*. Using the repositionable adhesive makes it easier to get the lace on straight.
- 5″ to 6″ wide black lace*
- Necklace pendant*. I bought the pendants for my project but if you have an old one that you’re not using any more, that would work, too. For the first version of the candle holder, you can also use a pin.
Gothic Lace DIY Halloween Mason Jar Candle Holder Version 1
- 1 1/2″ wide wired ribbon. I bought mine at Costco. They sell all kinds of great ribbon for Christmas.
- Velcro dots*
- Tin snips or wire cutters
- Clear Gorilla glue*
- Small clamp. I find these ratchet clamps* are the easiest ones to work with.
Gothic Lace DIY Halloween Mason Jar Candle Holder Version 2
- Rhinestone mesh ribbon*
- Glue gun
Step 1: Stick The Black Lace To The Jar
The first step to creating either version of the DIY Halloween candle holders is to attach the lace to the mason jar.
To do this, spray the outside of the mason jar with repositionable adhesive*. This is the same kind that I use for spraying my Cricut mat when it stops being sticky. Because it is repositionable, it will allow you to move the lace around if you don’t get it on quite right the first time.
Then wrap the lace around the jar, lining up the top of the jar with the top of the lace.
If the lace is a little long for the jar (like mine was), tuck the bottom ends under the bottom of the jar.
Cut off the lace where it meets the front edge on the back of the jar.
Step 2: Add The Ribbon and Pendant
DIY Halloween Candle Holder Version 1
For the first version of these Halloween mason jar candle holders, I wrapped 2″ wired ribbon around the jar and glued the pendant to the front.
Wrap The Ribbon Around The Jar
To do this, cut the ribbon so that it wraps completely around the jar with about an inch overlap.
Then use my favorite method for sticking the ends together – velcro dots. Stick one half of each dot to either end of the ribbon. Test it to make sure they are in the right place. The sticky sides need to meet so that the ribbon is tight around the jar.
Staple the dots to the ribbon to keep them in place.
Wrap the ribbon around the jar. Make sure that the ends meet on the “back” of the jar (the same side where the ends of the lace are meeting up.)
Pull the ribbon tight around the jar and attach with the velcro. Cut off any excess ribbon.
Glue On The Pendant
Before you glue the pendant on to the front of the jar, remove the ring that the chain would normally go through. I used tin snips to do this. Wire cutters would also work.
If you are using a pin instead of a pendant, use the snips to cut the post off the back. You’ll want to get it as flat as possible, so if it is glued on, you might want to try using pliers to peel it off the back.
Lay the mason jar down so that the back (where the ribbon ends join) is faced down.
Spread clear gorilla glue* on the back surface of the pendant and stick it to the front of the jar so that it’s centered on the ribbon.
Technically, you can use any kind of glue that works with metal and glass, but (as the name suggests) the clear gorilla glue dries clear. So if you put too much on (as I usually do), you won’t see it when it dries.
Then use a clamp to hold the pendant on the jar until the glue dries (a couple of hours).
DIY Halloween Candle Holder Version 2
The second version of these Halloween mason jar candle holders is a little easier than the first, as you can probably tell from the supplies list.
To start, cut the rhinestone mesh so that it is only 2 stones wide and long enough to wrap around the top of the jar.
Fold the cut rhinestone mesh in half. Then thread it through the ring on the top of the pendant like you would with a necklace chain. Move the pendant along the ribbon until it is in the middle.
Wrap the rhinestone mesh around the top of the mason jar so that the pendant is on the front of the jar. The ends of the rhinestone mesh should end up on the same side of the jar where the lace ends are meeting up.
Use a glue gun to attach the ends of the rhinestone mesh to the jar.
The Finished DIY Halloween Candle Holders
Add a candle (I use the flame-less kind*) and you are done!
I love the finished look of these black lace mason jar DIY Halloween candle holders.
They have a gothic vibe and would work well with either an elegant Halloween dinner party or an over-the-top Halloween bash.
I’m planning on doing both of these this year, so these candle holders will definitely get some use!
Have comments or questions on our gothic lace DIY Halloween mason jar candle holders? Tell us in the section below.
Pin It So You Don't Forget It!